Home > News > Content
Mixed Embroidery Machine Preventive And Maintenance
Oct 12, 2017

Mixed Embroidery Machine Preventive and maintenance

Computer blending machine is relatively a relatively sophisticated machinery, want to achieve greater efficiency in the Mixed Embroidery Machine Preventive and maintenance

production, to extend the return on investment equipment, do the maintenance of the machine is imperative. Mixing machine maintenance usually contains two kinds: one is preventive and maintenance; the second is the production and maintenance. The so-called prevention and maintenance refers to the machinery is not broken before the regular inspection or regular care; the so-called production and maintenance, refers to how to reduce production costs and improve product quality maintenance, the two are inseparable, combined. In order to be able to better do the maintenance work of the blending machine, we have here to develop a "three maintenance" system.

1. daily maintenance

The daily maintenance of the blending machine is carried out by the operating worker (the stall driver). The equipment is carefully checked by the equipment before the class or 5 to 10 minutes after the class. The equipment is carefully inspected by the equipment before the class or 10 to 15 minutes after the class. And require wiping the various parts of the machine and filling the oil, so that equipment often keep neat, clean, lubricated, safe. Class equipment failure, timely exclusion.

2. Level 1 maintenance

The machine is operated for one month (one shift). First-class maintenance by the operator is responsible for, machine repair work guide, according to the requirements of the equipment on the part of the demolition and inspection to clean up the provisions of the site, and clear the oil, pipeline, clean oil line, linoleum, oil filter, adjust the equipment positioning with the gap, Tighten loose screws.

3. Secondary maintenance

Second-level maintenance in addition to a level of maintenance content, the machine repair workers are responsible for every once a year, the equipment part of the disintegration of the inspection and repair, replacement or repair wear parts, cleaning, oil change, check repair electrical parts, Local recovery accuracy, to meet the normal operation of the machine requirements.

Of course, "maintenance" focus on security and support, which means that the work is in the usual production work carried out, we must rely on the strength of everyone, we should give full play to the enthusiasm of workers, the implementation of scientific management, Equipment maintenance work.

A blending machine is a lot of good or bad evaluation criteria, but the most direct standard, from the two aspects of the machine. On the one hand is the quality of the machine is good or bad, on the other hand is the length of the machine life or not. The quality of the machine depends on the quality of the blending machine manufacturers, but the length of life of the machine, or depends on the latter part of the maintenance. In order to improve the efficiency of the machine, increase the production of income, extend the return on investment in machinery, blending machine maintenance is imperative. In the embroidery machine operation of the blending machine, you need to do the following maintenance work!

A blending machine is a lot of good or bad evaluation criteria, but the most direct standard, from the two aspects of the machine. On the one hand is the quality of the machine is good or bad, on the other hand is the length of the machine life or not. The quality of the machine depends on the quality of the blending machine manufacturers, but the length of life of the machine, or depends on the latter part of the maintenance. In order to improve the efficiency of the machine, increase the production of income, extend the return on investment in machinery, blending machine maintenance is imperative. In the embroidery machine operation of the blending machine, you need to do the following maintenance work!

Mixing machine maintenance parts:

The maintenance of the blending machine, carried out by the embroidery workers, ordinary blender parts 5 to 10 minutes to seriously check the equipment, key blending machine parts 10 to 15 minutes time to seriously check the equipment. Need to wipe the various parts of the machine and filling the oil, so that equipment often keep neat, clean, lubricated, safe, is conducive to smooth operation of the machine. At present, the maintenance parts of the blending machine are mainly: spindle gearbox, trimming thread line structure, transfer line structure, color changing structure, X axis guide drive, Y axis guide drive, cable structure, embroidery frame structure.


Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with Fortune
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Product
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Copyright © China Fortune Group Co.,Limited. All Rights Reserved.