(1) Embroidery frames should be too heavy to reduce the weight of Embroidery Support Frame.
(2) The toothed belt is too tight and too loose. The tension of the X, Y direction toothed belt should be checked and adjusted.
(3) Track friction Foreign materials should be cleaned and lubricated.
(4) The loose connection between the drive shaft and the toothed belt should be checked for screws, fixing pins, and fastening.
(5) Defective drive bearings. Check whether the drive bearings are broken. If they are bad, change them.
(6) The friction between the frame and the table is large.
1 Dragon guide wheel has clearance.
2 The stepping motor and shaft connecting sleeve are loose.
3 loose pins should check whether the embroidered frame is deformed, whether the screws on the frame are loose, and if the screws are too long, adjust the guide tensioner.
(7) The loose material should be added to the embroidery material and re-clamped.
(8) The external data should be re-entered after being cleared.
China Fortune Group Co.,Limited
Add：Jianglong Zone, Zhuji, Zhejiang, China